1. Please confirm that the "Print 1/2 Copies" box is selected by going to Social Booth and looking under the "Printing" tab.


  2. Confirm that the "Display Single Strip" function is enabled by going to the "Templates" tab on Social Booth.



  3. The issue may also be housed within your printer settings. Please select the Windows button at the bottom left of your screen, type in Control Panel (no cursor may appear, but the ability to type and search is still possible), select View Devices and Printers, right click on your printer, and select Printer Properties. Select Preferences, Advanced, 2inch cut and change the paper size to (6x4) x N to ensure the images prints vertically (portrait), as shown in the above image. Images have been provided below for a visual of this explanation:
  4. If you are still not experiencing success printing the 2x6 strips with both of these functions enabled, we would encourage you to view the DS620A manual by clicking here. This manual will walk you through the steps to enable and support this function. 




    Capture.JPG
    It has come to attention that you may have problems with this guide if this button is used. If it has a red x on it then the software is not set up with the printer. Click on it and select your DNP printer to make sure it works correctly. If this button has a red x on it, then it will not work correctly. 

 

 

IF the cutter will not enable:

You will need to download the driver for your printer. You can use the following link to download the driver:
http://dnpphoto.com/Portals/0/Resources/ds620a_drivers_win10_v1.0.5.1.zip

Once you have completed the download, create a new folder on your desktop you can unzip the download to. 

Next, we will need to remove the printer in windows. Swipe in from the right edge of the screen and tap "All Settings". You should have a list on the left side of this window that lists "Printers & Scanners" - once in this screen tap on your DNP 620A and tap "Remove device". Repeat this if there are any copies of your printer.

After that, we will need to restart the spooler service. This is a Windows service that allows helps the system queue up items to print. To restart this process you will need to swipe up from the bottom of the screen to bring up the Windows taskbar. Once this is open, long-tap on an empty area on the bar and select "Task Manager". 

This will bring up a window that allows you to see all programs running as well as monitor various processes in your computer. You should see numerous tabs labeled "Processes", "Performance", ... and "Services". If these tabs are not visible you may need to tap on the chevron button titled "More Details".

Within the Services tab, tap on the "Description" column header to sort by description then scroll to the "Print Spooler" service. Once you have located this, long-tap and select "STOP". This service starts with Windows itself so do not select "Restart" here. 

We should now have a system with no detected DNP620A and no print jobs. We can now install the driver!

Open the folder you unzipped the driver to earlier. From here, open the folder titled "10" and double tap on "DriverInstall.CMD" (it may not show the '.CMD' portion depending on your system's settings). The program will now install the driver package on your system. If you are prompted with a security warning, be sure to allow the program to run by hitting "Yes". 

Once the driver has finished installing, restart your system. As Windows reboots, your system will re-start its spooler and re-detect your printer using the newly installed driver.

At this point, you can test the system and check the function of the printer!

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.